Tempe Camera

The Photogenic PowerLight PL2 Series optimizes speed, power and control making it one of the most advanced lighting systems for photographers everywhere. Five models offered provide the correct product for your specific needs. Ideal for digital and conventional photography.

This unit features a UV coated flashtube, which slightly warms the tone of the flash output.

This 2 light kit offers a total of 1000 watts - enough power for all your work. Also included, are umbrellas for softening and broadening the light output, lightstands for sure support of the heads with accessories up to a height of 13', and a padded travel case for storage and transport.

Key Features

• 6 F-Stop Power Range
• Sliding switch provides infinite flash power settings from 32 w/s to 1000 w/s.
• Power levels are visible in easy-to-read LED digits.
• Remote Operation is offered with optional Remote Digital Display and Flash Adjustment (PLDRC-1), Remote Digital Display and Infrared Receiver (PLDIR-1) and the Wireless Studio System Controller Software.
• Low Trigger Voltage so that even today's sensistive digital cameras can be used with the Photogenic Powerlights.
• Built In Slave is a highly sensitive, switchable optical slave for synchronization with other flashes.
• Auto Dump Function that gives access to lower power selections without the need to manually dump a higher power first.
• Modeling Light that features a 250W adjustable quartz modeling light with independent power control, and is infinitely adjustable from full to 1/32 power.
• Ready Indication that dims the modeling light while charging the capacitors.
• When the capacitors are at 100%, the modeling lamp relights.
• User Replaceable Flashtube so that no tools are required to replace the "plug & play" flashtubes.
• Fan Cooled with low noise, high performance fan that offers increased protection during the most demanding applications.
• Umbrellas, the famous "Eclipse" 45" model, hides the metal framework underneath a satin, white fabric.
• Light Stands that support the lights and accessories, air-cushioning provides extra protection if you forget to tighten the light stand sections.
• Case with padded, divided interior and wheels

Power (Watt Seconds)	Each Monolight: 500 WS
Guide Number	365 with ISO 100
Flash Duration	1/1300 second at full power
Power Control	Full to 1/32 range (6 f-stops), 0.1 f-stop resolution
Recycling Time	0.5 to 1.5 seconds recharge
Fan Cooled	Yes
Modeling Lamp	250 Watt Quartz, ESS
Voltage	105-125 VAC, 60 Hz, 15 Amp Stabilization: +- 0.05 f-stop
Built-In Slave	Yes
User replaceable flashtube	Yes
Dimensions	Each Monolight: 4.5'' x 4.5'' x 6.75''
Weight	Each Monolight: 5 pounds, 8 ounces
Notes	Modeling Light Control: Full to 1/32 range, 0.1 f-stop resolution, line voltage regulated. Triggering: Built in Photo Slave Synchronization Jack 5 volt isolated, push to test button